Humidification mixer commissioning in two stages: (a) no-load operation in case of no load running 1-2 hours. (2) The load operation without anomalies before staging load test run. First paragraph: 25% of the rated load of the second paragraph: 50% of the rated load of the third paragraph: 75% of the rated load of the fourth paragraph: 100% of the rated load operating time of each temperature stability prevail, but not less than 2 hours. Load operation should be no shock, vibration, oil spills or other unusual noises. Gearbox temperature must not exceed 40 ℃, oil temperature must not exceed 60 ℃, the bearing temperature must not exceed 80 ℃. Exclude commissioning of all failures can be put into official use. Cautions a wet mixer, pre-commissioning, added to gasoline or kerosene, after running wash tank, sump parts, then anti-out. Add gear oil, then put into. 2, pre-commissioning, hand moving belt wheel climbing the spindle idle for several weeks to confirm accessibility and anomalies before they start. 3, start the host must wait until the motor reaches the rated speed, then the clutch slow-binding. Avoid excessive force, mechanical damage, reduce machine life. We insist: the customer is always our partners, respect for customers, understanding customers, exceed customer expectations continue to provide products and services, which is what we have to uphold and promote the idea; if you have any comments or suggestions, please submit feedback via phone or Contact Us pump seal, wet mixer, pneumatic conveying equipment, silo top filter, 508 release valve, bulk machine http://www.zzgaotie.com